3
Install the LR5000 Utility Program on the
computer.
See: "2.3" (p.21)
4
Select the recording interval for the logger
(in this case, 10 minutes).
See: "Recording Interval Setting" (p.29)
(The setting can be made also from the
LR5000 Utility Program.) (p.35)
5
Set the logger to the correct date and time
(in this case, 15 May 2010, 13:00).
See: "Real-Time Clock Setting" (p.29)
(With the LR5000 Utility Program, the log-
ger can be set to the computer time.)
(p.38)
6
Set the stop method to [OFF].
(This setting provides one-time measurement:
recording stops when memory becomes full.)
See:
"Stop Method Setting (for when
memory becomes full)" (p.30)
(The setting can be made also from the
LR5000 Utility Program.) (p.35)
5
4
3
6
To Next Page
Loading...
