Commissioning
In the event of a system malfunction an error code is displayed in the bottom right of the display:
System malfunction?
The error codes and what they mean are explained in the error codes table in chapter 7.2.
The device is not ready for operation until all faults have been rectified and no error codes are
displayed.
If the console is not started as described, please contact your nearest service department.
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com 18/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
To Next Page
Loading...