Appendix
Error code Description
116F Failure for Horn Output
1170 Failure for Warning Output
11FF Failure for not outpus off
11xx CAN and I/O Error Cable Break / Open Load / Lower Limit
12xx CAN and I/O Error Short-Circuit to Ground / Upper Limit
13xx CAN and I/O Error Short-Circuit Battery / Upper Limit
14xx CAN and I/O Error Error on Module
15xx CAN and I/O Error Output deactivated
16xx CAN and I/O Error Reserved
17xx CAN and I/O Error Data Error / CAN not initialized
18xx CAN and I/O Error Timeout / CAN Device not responding
19xx CAN and I/O Error Safety Failure
1F00 System Error Code: System not initialized
1F01 System Error Code: Console communication error / timeout
1F02 System Error Code: Kinematics communication error / timeout
1F03 System Error Code: Limiter communication error / timeout
1F04 System Error Code: Datalogger communication error / timeout
1F05 System Error Code: Ext System 1 communication error / timeout
1F06 System Error Code: Ext System 2 communication error / timeout
1F07 System Error Code: Ext System 3 communication error / timeout
1F08 System Error Code: Ext System 4 communication error / timeout
1FFF System Safety Fault: Controller Stopped
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com 56/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
To Next Page
Loading...