Hirschmann qSCALE i2 Service Manual

Appendix
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 89/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
Error
Code
Description
Cause
Notice/Solutions
01A2
Global Cut
Min load limit on outrig-
ger underrun front
center
Load on Outrigger too Low
(tilting danger)
Move the boom into the permitted
Working Range (load chart)
02A2
Single Cut
03A2
Error
04A2
Warning
05A2
Pre-Warning
01A3
Global Cut
Max load limit on outrig-
ger reached front center
Load on Outrigger too High
(outrigger damage)
Move the boom into the permitted
Working Range (load chart)
02A3
Single Cut
03A3
Error
04A3
Warning
05A3
Pre-Warning
01A4
Global Cut
Min load limit on outrig-
ger underrun front right
Load on Outrigger too Low
(tilting danger)
Move the boom into the permitted
Working Range (load chart)
02A4
Single Cut
03A4
Error
04A4
Warning
05A4
Pre-Warning
01A5
Global Cut
Max load limit on outrig-
ger reached front right
Load on Outrigger too High
(outrigger damage)
Move the boom into the permitted
Working Range (load chart)
02A5
Single Cut
03A5
Error
04A5
Warning
05A5
Pre-Warning
01A6
Global Cut
Min load limit on outrig-
ger underrun rear left
Load on Outrigger too Low
(tilting danger)
Move the boom into the permitted
Working Range (load chart)
02A6
Single Cut
03A6
Error
04A6
Warning
05A6
Pre-Warning
01A7
Global Cut
Max load limit on outrig-
ger reached rear left
Load on Outrigger too High
(outrigger damage)
Move the boom into the permitted
Working Range (load chart)
02A7
Single Cut
03A7
Error
04A7
Warning
05A7
Pre-Warning
01A8
Global Cut
Min load limit on outrig-
ger underrun rear center
Load on Outrigger too Low
(tilting danger)
Move the boom into the permitted
Working Range (load chart)
02A8
Single Cut
03A8
Error
04A8
Warning
05A8
Pre-Warning
01A9
Global Cut
Max load limit on outrig-
ger reached rear center
Load on Outrigger too High
(outrigger damage)
Move the boom into the permitted
Working Range (load chart)
02A9
Single Cut
03A9
Error
04A9
Warning
05A9
Pre-Warning
01AA
Global Cut
Min load limit on outrig-
ger underrun rear right
Load on Outrigger too Low
(tilting danger)
Move the boom into the permitted
Working Range (load chart)
02AA
Single Cut
03AA
Error
04AA
Warning
05AA
Pre-Warning
01AB
Global Cut
Max load limit on outrig-
ger reached rear right
Load on Outrigger too High
(outrigger damage)
Move the boom into the permitted
Working Range (load chart)
02AB
Single Cut
03AB
Error
04AB
Warning
05AB
Pre-Warning
Table 8 - 2

Hirschmann qSCALE i2 Specifications

General

Brand	Hirschmann
Model	qSCALE i2
Category	Control Unit
Language	English