Hirschmann qSCALE i2 Service Manual

Appendix
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 94/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
0A74
Redundancy error
Angle - redundancy error
Turn the Ignition off and on again. Consult
Customer Service if the error occurs again
0A75
Redundancy error
Pressure - redundancy error
Turn the Ignition off and on again. Consult
Customer Service if the error occurs again
0A76
Redundancy error
Force - redundancy error
Turn the Ignition off and on again. Consult
Customer Service if the error occurs again
0A77
Redundancy error
Slew - redundancy error
Turn the Ignition off and on again. Consult
Customer Service if the error occurs again
0A7F
Redundancy error
Operating mode - redundancy
error
Turn the Ignition off and on again. Consult
Customer Service if the error occurs again
0AA0
Outrigger load detection
Outrigger load detected
Move the boom into the permitted Working
Range (load chart)
Table 8 - 3

Hirschmann qSCALE i2 Specifications

General

Brand	Hirschmann
Model	qSCALE i2
Category	Control Unit
Language	English