Engine
4-51
Inspect the shift fork follower (1) and the
shift fork pawl (2). Look for scoring, bends,
wear or damage.
Inspect the guide bar for bends.
Warning:
Do not attempt to straighten a bent
guide bar.
Check the movement of the shift fork on
the guide bar. It should slide smoothly.
Inspect the springs for cracks or damage.
Inspect the dog and slot engagement.
Look for wear or damage.
Inspect the high wheel gear and middle
drive gear teeth. Look for discoloration,
pitting or wear. Check the dogs or slots for
rounded edges, cracks or damage. Check
the gear movement on the shaft. It should
move smoothly.
Replace the circlip with a new one.
To Next Page
Loading...
Need help?
General
