Hisun HS400 - General Specifications

Specifications
2-4
General Specifications
Item Standard
Dimensions
Overall length
Overall width
Overall height
Seat height
Wheelbase
Minimum ground clearance
Minimum turning radius
2,680mm (105.5in)
1,320mm (52.0 in)
1,870mm (73.6in)
840mm (33.1in)
1,830mm (720in)
300mm (11.8 in)
3,500mm (137.8 in)
Basic Weight
With oil and full fuel tank 548kg (1,208 lb)
Engine
Engine type
Cylinder arrangement
Displacement
Bore × stroke
Compression ratio
Standard compression pressure (at sea
level)
Starting system
Liquid cooled 4-stroke, SOHC
Forward-inclined single cylinder
392cm3
84.5×70mm (3.33×2.76in)
9.3:1
1,324kPa (13.24kg/cm2,188.31psi)
at 850r/min
Electric starter
Lubrication System
Wet sump
Oil Type and Grade
Engine oil
Final gear oil
Differential gear oil
API service SE,SF,SG type or higher
SAE80 API “GL-4” Hypoid gear oil
SAE80 API “GL-5” Hypoid gear oil
Oil capacity
Engine oil
Periodic oil change
With oil filter replacement
Total amount
Final gear case oil
Periodc oil change
Total amount
Differential gear case oil
Periodic oil change
2.1 L (1.85 lmp qt, 2.22 US qt)
1.2 L (1.06 lmp qt, 1.27 US qt)
2.1 L (1.85 Imp qt, 2.22 US qt)
2.2 L (1.94 Imp qt, 2.32US qt)
0.25 L (0.22 lmp qt, 0.26 US qt)
0.28 L (0.25 lmp qt, 0.30 US qt)
0.32 L (0.28 lmp qt, 0.34 US qt)