Hisun HS400 Service Manual

General
1-8
Cleaning Parts
Cleaning parts is one of the more tedious
and difficult service jobs performed in the
home garage. Many types of chemical
cleaners and solvents are available for
shop use. Most are poisonous and
extremely flammable. To prevent
chemical exposure, vapor buildup, fire
and serious injury, observe each product
warning label and note the following:
1. Read and observe the entire
product label before using any
chemical. Always know what type
of chemical is being used and
whether it is poisonous and/or
flammable.
2. Do not use more than one type of
cleaning solvent at a time. If mixing
chemicals is required, measure the
proper amounts according to the
manufacturer.
3. Work in a well-ventilated area.
4. Wear chemical-resistant gloves.
5. Wear safety glasses.
6. Wear a vapor respirator if the
instructions call for it.
7. Wash hands and arms thoroughly
after cleaning parts.
8. Keep chemical products away from
children and pets.
9. Thoroughly clean all oil, grease
and cleaner residue from any part
that must be heated.
10. Use a nylon brush when cleaning
parts. Metal brushes may cause a
spark.
11. When using a parts washer, only use
the solvent recommended by the
manufacturer. Make sure the parts
washer is equipped with a metal lid
that will lower in case of fire.
Warning Labels
Most manufacturers attach information and
warning labels to the UTV. These labels
contain instructions that are important to
personal safety when operating, servicing,
and transporting the UTV. Refer to the
owner’s manual for the description and
location of labels. Order replacement labels
from the manufacturer if they are missing or
damaged.
Serial Numbers
Serial and identification numbers are
stamped on various locations on the frame,
engine and carburetor body. Record these
numbers in the Quick Reference Data
section in the front of the manual. Have
these numbers available when ordering
parts.
Fasteners
Proper fastener selection and installation is
important to ensure the UTV operates as
designed and can be serviced efficiently.
The choice of original equipment fasteners
is not arrived at by chance. Make sure
replacement fasteners meet all the same
requirements as the originals.
Many screws, bolts and studs are
combined with nuts to secure particular
components.

Hisun HS400 Specifications

General

Brand	Hisun
Model	HS400
Category	Offroad Vehicle
Language	English