44
3.1 Projector Web Control - Network Settings (continued)
3. Web Control
1. Simple Access Point settings
Item Description
,3&RQ¿JXUDWLRQ
Con¿gures the IP Address of the projector in Simple
Access Point mode.
Subnet Mask of this mode is ¿xed to 255.255.255.0.
SSID *1 Con¿gures SSID of Simple Access Point mode.
SSID Broadcast
Switches ON/OFF of SSID %roadcast.
When this function is set to OFF, SSID of the projector
is not displayed in wireless connection list of the
deYice.
Encryption Selects data encryption method.
WPA Passphrase *2 Con¿gures WPA Passphrase.
Wireless Freq. Con¿gures the freTuency for the wireless connection.
Bandwidth
Con¿gures the freTuency bandwidth for the wireless
connection.
If you want to get a higher link speed, change this to
40MH] or 80MH].
Channel
Selects the wireless channel.
The selectable channels are different depending on the
wireless freTuency band and %andwidth.
*1 The text length can be up to 32 alphanumeric characters and symbols. Only
symbols “)*,-./:< >"#[?]AB^_`a and space” can be used.
*2 The text length can be 8 to 63 alphanumeric characters and symbols. Only
symbols “)*,-./:< >"#[?]AB^_`a and space” can be used.
continued on next page)
This projector uses the 5 *H] and 2.4
*H] radio freTuency band, but depending on the
country or region you are in, the channels that
you can use might be limited. Please consult your
dealer for information on the usable channels.
NOTE
Depending on your internet connection,
the projector may not operate with the bandwidth
you set or you may not get a higher link speed.
NOTE
To Next Page
Loading...
