Hitachi IJ PH - Page 153

6-16
6.2.13.2 F Memory Fault 9
6.2.14 Hardware Error C
Hardware
Error C
Replace the EZJ124 board.
Resume the
operation.
Is the CN3 connection on
the EZJ124 board in poor
contact?
Yes
No
Normality is restored when
the connector is disconnected
and then reconnected.
F Memory
Fault 9
Resume the
operation.
Yes
Does the fault recur
when the EZJ99 board
is attached?
No
Replace the EZJ99 board.
System reset with Rescue CF
card.
Does the fault recur?
Yes
No