● Ink Replacement 7-12
Press the Start/Continue key.
● The "Circulation control" screen then opens as follows.
19
Open the "Operation management" screen, and set the
operating time to 0.
For the procedure, see Section 4.1 Managing the Operations.
20
The ink replacement is now completed.
When you install the print head cover, the IJ printer goes into the
"Standby state" (ink ejection and deflection voltage OFF).
To initiate printing, open the Manual Control menu and sequentially
press the Ready and OK keys to enter the "Ready" state.
Shut
down
Manual
Start/
Continue
Eject ink
(Goes to Standby)
Next
menu
Circulation control Status: Stop
Prev.
menu
Cleaning stop No-cleaning stop
Ink replacement
Ink filter
replacement
Nozzle backwash
Process prior to
long-term shutdown
Process after
long-term shutdown
Gutter cleaning
Cancel
Com=0
The screen shown below opens on completion of the ink
refill
176
Circulation control Status: Stop
Start/
Continue
Process : Ink replacement
Com=0
Proc.time: Approx. 4 minutes
Proc. status: In progress
Change the direction of the ink filter so
that tube (D) is at the bottom of the
filter. Press [Start/Continue].
Operating guide
Return the ink filter to its original state (piping D is the downside).
18
Ink filter
Piping (D)
Handle
Ink drainage
Ink rep.
Ink refill
To Next Page
Loading...
