● Ink Filter Replacement 7-22
When the predetermined period of time elapses,
the following operating guidance appears on the display.
6
*1 Clean the connection at the end of the recovery tube sufficiently
with the makeup ink, and then connect it as it originally was.
*2 To prevent the recovery tube from becoming crimped, be careful
not to let it cross another tube.
Circulation control Status: Stop
Start/
Continue
Process : Ink filter replacement
Com=0
Proc.time: Approx. 4 minutes
Proc. status: In progress
Abort
Connect the recovery tube
the main ink tank as before.
Press [Start/Continue].
Operating guide
Press the Start/Continue key .
The following operating guidance appears.
7
Pull out the ink filter.
8
Circulation control Status: Stop
Start/
Continue
Process : Ink filter replacement
Com=0
Proc.time: Approx. 4 minutes
Proc. status: In progress
Abort
Replace ink filter with a new one.
Put ink into the ink reservoir.
When ready, press [Start/Continue]..
Operating guide
Ink filter
Ink drainage
Filter rep.
Ink refill
Ink drainage
Filter rep.
Ink refill
To Next Page
Loading...
