8.2.4 Troubleshooting by means of the flashing alarm LEDs for RPK-FSNM
The red LED located on the panel indicates the following alarms:
Code Cause Indication
Alarm 02 Unit protection This alarm is activated when the blinks sequence is two times ON / two seconds OFF
Alarm 03 Transmission error This alarm is activated when the blinks sequence is three times ON / two seconds OFF
Alarm 04 Inverter outdoor unit
error
This alarm is activated when the blinks sequence is four times ON / two seconds OFF
For the rest of the alarms, the blink sequence is one second ON / one second OFF.
8 Troubleshooting
294
SMGB0060 rev. 1- 12/2010
To Next Page
Loading...
