Hitachi RAS-3HVRNS - Optional Parts and Installation RAS-(8-12)HRNM

Specifications of snow protection hood
Product name Air discharge hood Rear suction hood Left suction hood
Model ASG-NP335F ASG-NP335FS2 ASG-NP280B ASG-NP280BS2 ASG-NP280L
ASG-
NP280LS2
Quantity 2 per unit 1 per unit
Material
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Bonderized steel
sheet
Iron
Stainless
(NSSC 180)
Color
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Gray (1.0Y8.5/0.5
or approximation)
—
Weight 3 kg 14 kg 8 kg
Assembling Knockingdown parts (assembled at field)
Components
Hood For air discharge part x 1
For rear side air intake x 1
(Upper side x 1, lowe side x 1)
For left side air intake x 1
Fixing screw 4 (M5x12 tapping screw) 11 (M5x14 tapping screw) 8 (M5x12 tapping screw)
Fixing screw
(SUS)
6 (M5x14 tapping
screw)
6 (M5x14)
24 (M5x14 tapping
screw)
24 (M5x14)
12 (M5x12 tapping
screw)
12 (M5x14)
Installation manual
Installation restriction
Installation with “Guard net”, “Wind guard”
or “Air flow guide” is not available
Installation with “Guard net” is not available
Safety wire rope for overturning prevention
(optional parts)
ASG-SW20A
2.7.4 Optional parts and installation RAS-(8-12)HRNM
¿ Air flow guide, wind guard and snow protection hood
Optional parts
Model
Air flow guide AG-335A X 2
1 2
3
1 Air flow guide
2 Wind Guard
3 Snow protection hood
Wind guard
WSP-335A X 2
Snow protection
hood
Zinc plate
Air outlet ASG-NP335F X 2
Air inlet of rear side ASG-NP335B
Air inlet of side face ASG-NP335L
Strainless
plate
(NSSC 180)
Air outlet ASG-NP335FS2 X 2
Air inlet of rear side ASG-335BS2
Air inlet of side face ASG-NP335LS2
2 Unit Installation
42
SMGB0060 rev. 1- 12/2010