No. Part name Remarks
2 Attaching P-Plate Assy Assembly (1-1~1-14)
1-1 Attaching P-Plate —
1-2 Printed Circuit Board PCB Main (PO 052)
1-3 Printed Circuit Board PCB for AC Fan Motor (PO 083)
1-4 Plastic Material Spacer
1-5 Plastic Material Spacer
1-6 Plastic Material Spacer
1-7 Transformer TF
1-8 Terminal Board TB
1-9 Noise Filter NF1
1-10 Fuse Holder —
1-11 Fuse 40 A
1-12 Printed Circuit Board PCB for DC Fan Motor (PO084)
1-13 Plastic Material Holder for NF1
1-14 Reverse Phase Relay
3 Power Plate Assy Assembly (3-1~3-11+3-12)
4 Power Plate Assy Assembly (3-1~3-11+3-13)
3-1 Power Plate —
3-2 Radiation Fin —
3-3 Diode Module DM
3-4 Transistor Module IPM
3-5 Printed Circuit Board PCB for Inverter (PV041)
3-6 Plastic Material Collar
3-7 Plastic Material Bush
3-8 Plastic Material Spacer
3-9 Thermistor Fin Thermistor
3-10 Capacitor Assy Harness PC301
3-11 Noise Suppressor ZNR Assy
3-12 Capacitor (For RAS-8HRNSE) 440V AC, 6 µF
3-13 Capacitor (For RAS-10HRNSE) 440V AC, 7.5 µF
5 CB Plate Assy Assembly (5-8~5-13+5-6)
6 CB Plate Assy Assembly (5-8~5-13+5-7)
5-6 CB Plate Assy (For RAS-8HRNSE) —
5-7 CB Plate (For RAS-10HRNSE) —
5-8 Reactor DCL
5-9 Mag Contactor CMC1
5-10 Resistor RS1, RS2
5-11 Resistor R1
5-12 Resistor R2
5-13 Capacitor CB1,CB2 (400V AC,4700 µF)
7 Electrical Wiring Diagram (For RAS-8HRNSE) Assembly (1+3+5+Harness)
8 Electrical Wiring Diagram (For RAS-10HRNSE)` Assembly (2+4+6+Harness)
9 Spare Parts
352
SMGB0060 rev. 1- 12/2010
To Next Page
Loading...
