Hitachi RAS-3HVRNS - Page 69

by cutting along the guideline at the rear of the cover or
punching it with a driver. Remove the burr with a cutter.
N O T E
Hold the cover with a hand at the same time while removing
the screws as the cover may fall down.
1. Service cover.
2. Hook (three places): two fan.
2. Hook (two places): one fan.
• For the front and side piping
1. Front piping hole.
2. Side piping hole.
1
2
1
2
3 Piping work and
refrigerant charge
61
SMGB0060 rev. 1- 12/2010
3