Chapter 1 — About the RFID Reader
4 IF1 Fixed RFID Reader Series User Manual
About the LED Indicators
The LED indicators on the reader light up to indicate the status of the
reader during operation.
IF1 LED Indicators
3 USB Connects the reader to a desktop PC for
configuration.
4 Antenna Connects an external antenna to your
reader. The antenna port uses Reverse
TNC connectors.
Reader Port Descriptions (continued)
Callout Port Description
Professional Installation Required: Government regulatory
agencies require this RFID reader use only approved antennas and
cables. Therefore, this reader uses a custom antenna connector.
Do not use antennas not approved for use with this reader.
To Next Page
Loading...
Need help?
General
