Chapter 1 — About the RFID Reader
12 IF1 Fixed RFID Reader Series User Manual
Log In to the Web Browser Interface
After the reader is assigned an IP address, you can configure the reader
through the web browser interface. Before you log in, make sure an IP
address has been assigned to the reader, and the reader is connected to
your network.
1 Start a web browser.
2 In the browser address field, enter the IP address, and press Enter.
3 (Optional) For a secure session, click A secure session is
available.
4 Enter your Username and Password. The default user name is
intermec and the default password is intermec.
5 Click Non-Secure Login, or Secure Login. The Ethernet screen
appears and you are logged in to the web browser interface.
To Next Page
Loading...
Need help?
General
