Chapter 2 — Configure the Reader
IF1 Fixed RFID Reader Series User Manual 23
About RFID Services
The RFID services set the protocol your application uses to
communicate with the RFID module. There are two RFID services
available:
• BRI (Basic Reader Interface): Intermec proprietary protocol for
controlling the reader. For information about the BRI, see Basic
Reader Interface Programmer Reference Manual.
• LLRP (Low-Level Reader Protocol): EPCglobal standard for network
interfaces between the RFID reader and its controlling software. The
IF1 supports version 1.0.1 of the EPCglobal LLRP. For information on
LLRP, see go to http://www.epcglobalinc.org/standards/llrp. An
open source LLRP Toolkit can be downloaded at http://
sourceforge.net/projects/llrp-toolkit.
Enable Telnet Server Enables access to the Linux system console via standard Telnet,
using the same login and password as the web browser interface.
The default login and password is intermec. The Telnet server is
disabled by default.
Enable CIFS/SMB
Service
Enables the Common Internet File System service, which creates
a file sharing connection from a Windows PC to the /home/
developer directory on the IF61. CIFS/SMB is disabled by default.
When you enable the CIFS/SMB service, entry fields for a
username and password appear. Enter these settings and then
click Activate Changes.
Enable Bonjour Service
Advertisement
Enables the reader to advertise services and be discovered by
Bonjour zero-configuration networking. Bonjour is enabled by
default.
To prevent errors when using Bonjour, make sure the reader
hostname does not include spaces.
Enable UPnP Discovery Enables the reader to be discovered by Universal Plug and Play
protocols. UPnP is enabled by default.
Services Settings (continued)
Service Description
To Next Page
Loading...
Need help?
General
