Chapter 2 — Configure the Reader
IF1 Fixed RFID Reader Series User Manual 31
LLRP Settings
LLRP settings establish an interface method between the reader and a
client.
Configure Security
To make sure the reader is secure, change your security settings when
you set up your reader. You can secure the reader by:
• changing user credentials.
• enabling a RADIUS server.
• enabling or disabling serial configuration.
LLRP Settings
Setting Description
Secure Server Enable Allows connections to the secure LLRP server on port 5085.
Unsecure Server Enable Allows connections to the unsecure LLRP sever on port 5084.
Download Intermec
Extensions Definition
Downloads an XML file that describes Intermec by Honewell-
specific extensions for the LLRP protocol.
Reader Initiated
Connections
For reader-initiated TCP/IP connections to a remote LLRP client.
• Client address - The IP address of the remote LLRP client.
• TCP port - Port number for the TCP/IP socket connection.
• Enable security (TLS) - Select this option to enable Transport
Layer Security for this TCP/IP connection.
To Next Page
Loading...
Need help?
General
