Chapter 2 — Configure the Reader
22 IF1 Fixed RFID Reader Series User Manual
Configure Services
Configure the way users (such as developers) can access and configure
the reader.
1 Log in to the web browser interface and click Network
Configuration > Services.
2 Enable or disable the services by selecting or clearing the check
boxes, or by selecting options from the drop-down list.
3 Click Activate Changes to save your changes.
Services Settings
Services settings control the way users access the reader.
Services Settings
Service Description
Enable Web Server
(Insecure)
Enables access to the web browser interface. An insecure
connection only allows users to log in to web browser interface
from HTTPS through port 80.
Enable Web Server
(Secure)
Enables access to the web browser interface. An insecure
connection only allows users to log in to web browser interface
from HTTPS through port 443.
Enable SSH Server Enables Secure Shell (SSH) access to the Linux system console
using the same login and password as the web browser interface
(default is
intermec). SSH access is disabled by default.
Enable FTP Server Enables access to the reader through its FTP server.
To Next Page
Loading...
Need help?
General
