Honeywell 1026FF02F9 User Manual

Chapter 2 — Configure the Reader
28 IF1 Fixed RFID Reader Series User Manual
Select Tries (Not supported by EPCglobal Class 1 Gen 2 tags) The number of
times a group select is attempted. A group select is the command
that starts the identity process. Valid range is 1 to 254. Default is 1.
This setting is equivalent to the SELTRIES BRI attribute.
Unselect Tries (Not supported by EPCglobal Class 1 Gen 2 tags) The number of
times a group unselect is attempted. Valid range is 1 to 254.
Default is 1.
This setting is equivalent to the UNSELTRIES BRI attribute.
Session The command session parameter to a corresponding EPCglobal
Class 1 Gen 2 air protocol command. Valid range is 0 to 3. Default
is 3.
This setting is equivalent to the SESSION BRI attribute.
Initial Q (EPCglobal Class 1 Gen 2 tags only) The initial Q parameter value
used by the Query command. Valid range is 1 to 254. Default is 4.
If you know there is only one tag in the field, set this attribute to 0
for best performance.
This setting is equivalent to the INITIALQ BRI attribute.
Initialization Tries The maximum number of times the reader attempts to initialize a
tag. Valid range is 1 to 254. Default is 1.
This setting is equivalent to the INITTRIES BRI attribute.
Schedule Option Determines how antennas are switched during the inventory
process:
• 0 - Legacy BRI operations
• 1 - Simplified BRI operations
• 2 - Simplified BRI operations with EPCC1G2 A/B toggling.
Default is 0.
This setting is equivalent to the SCHEDULEOPT BRI attribute.
ID Tries The maximum number of times the reader executes the identify
algorithm before a response is returned to a Read or Write
command. Valid range is 1 to 254. Default is 1.
In practice, this is the number of times a tag ID attempt is made for
the antenna.
This setting is equivalent to the IDTRIES BRI attribute.
Antenna Tries The number of times the antenna is used for a Read and Write
command. Valid range is 1 to 254. Default is 1.
This setting is equivalent to the ANTTRIES BRI attribute.
BRI Attribute Settings Descriptions (continued)
Setting Description

Honeywell 1026FF02F9 Specifications

General

Brand	Honeywell
Model	1026FF02F9
Category	Card Reader
Language	English