Honeywell 200 Series User Manual

SECTION IV. TYPE 214-1 CARD PUNCH
2. If there is no card offset, immediately throwaway the last card stacked.
Some programs may be specialized to follow other procedures, as specified in the appropriate
software manuals.
NOTE: If successive PDT instructions are not issued to the punch
within 30-second intervals, then all punch and transport
motors turn off, and the punch strobe lamps are reduced to
half brilliance. The punch, however, remains in the ready
status. A subsequent PDT instruction, after a time delay
of one second, causes the motors to turn on and the lamps
to be brought to full brilliance.
4-8

Honeywell 200 Series Specifications

General

Brand	Honeywell
Model	200 Series
Category	Desktop
Language	English