Honeywell 900 - Ramp Setup Display; Table 34 Edit Ramp Display Details

Process Displays
Ramp Ramp setup display
104 900 Control Station User Guide Revision 9
May 2014
Ramp setup display
Touch the blue title bar to edit the parameters for each ramp.
Table 34 Edit ramp display details
Item Description
OUT SCALE HIGH High output limit after rescale. Range: Full scale +/– within PV range
limits.
OUT SCALE LOW Low output limit after rescale. Range: Full scale +/– within PV range limits.
IN HIGH LIMIT Input high limit value applied to the PV after signal lag. Range: Full scale
+/– within PV range limits.
IN LOW LIMIT Input low limit value applied to the PV after signal lag. Range: Full scale
+/– within PV range limits.