Main Menu
Station Settings Format Memory Device
62 900 Control Station User Guide Revision 9
May 2014
Format Memory Device
Lets you format CompactFlash or USB device.
Note that the Control Station uses the FAT16 file system. You may achieve better performance if the
memory device is formatted on the Control Station as opposed to your computer.
Station Setup
Lets you:
• Change languages
• Adjust display brightness
• Calibrate the touch screen
• Test the touch screen
• Test the soft membrane keys left of the display
• Clean the screen – this disables the touch screen. Use when cleaning the screen or when replacing the
optional protective film that covers the screen.
Station Status
Shows the status of the Control Station.
• Versions of boot loader, firmware, application
• Path and name of HC900 configuration file being monitored by the Control Station
• Time and cause of last several Control Station restarts
Station Comm Ports
Shows status of the Control Station’s communication ports (Ethernet, RS232 program, RS232 Comm,
RS485).
Change Passwords
Lets you change user passwords.
Language Menu Selection
Lets you change the language on the Control Station UI. Use one of the following methods to change the
language.
• Go to Station Setup Menu > Languages.
or
• Click the flag icon present on the screen.
To Next Page
Loading...
