Honeywell 900 - Status Leds; Figure 6 Status Leds

Features
Status LEDs
12 900 Control Station User Guide Revision 9
May 2014
Status LEDs
The Status LEDs indicate:
• Run status of the Control Station
• CompactFlash card status
• Alarm status.
Figure 6 Status LEDs
Green LED Indication
Flashing Unit is in the boot loader, no valid configuration is loaded.
Steady Unit is powered and running an application.
Yellow LED Indication
Off No CompactFlash card present.
Steady CompactFlash card present.
Flashing rapidly CompactFlash being checked.
Flickering Unit is writing to the CompactFlash, either because it is storing data, or
because the PC connected via the USB port has locked the drive.
Flashing slowly Incorrectly formatted CompactFlash card present.
Red LED Indication
Flashing A tag is in alarm state.
Steady Valid configuration is loaded and no alarms are present.