Honeywell 900 - Diagnostics; Menu Overview

Main Menu
Diagnostics Menu Overview
36 900 Control Station User Guide Revision 9
May 2014
Diagnostics
Touching the DIAGS indicator on the status bar will go to the System Diagnostics page so that you can see
at a glance the status of the H900 Controller. As the screen shot below shows, diagnostic information on
the CPU, Communications, and I/O Rack is displayed with green highlights indicating a good status or red
if there is a diagnostic. Touching the various buttons will direct you to the various detailed screens per the
menu tree below.
Menu Overview
Menu Submenu
Controller Diagnostics (p. 37) Rack n Diagnostics I/O Module Diagnostics
(p. 42)
Module Details (p.
43)
Details.
This links to the main
Communications menu.
See page 22.
I/O Module Diagnostics (p. 42) Rack n I/O Modules (p. 42) Module Details (p. 43)
I/O Calibration (p. 159)
Motor Setup (p. 172)
Communication Diagnostics
This links to the main
Communications menu. See page
22.
Controller Communications
Redundant Overview (p. 48)
Lead CPU Diagnostics (p. 56)
Reserve CPU Diagnostics (p. 56)