Honeywell 900 - Alternator Setup Display; Alternator Edit Setup Display

Process Displays
Alternator Alternator Setup display
106 900 Control Station User Guide Revision 9
May 2014
Alternator Setup display
Touch the blue title bar to edit the setup parameters.
Item Description
Input Status On or Off.
Output Status Blank – Normal operating output (no designation)
DNR – Device Not Ready (see Alternator Operator display for example)
Output Sequence Integer between 0 and 16
“0” indicates the output is not in the Output sequence.
Advance Advances the output sequence. Not available for style DIRECT.
Edit Select to edit the sequence. See Alternator Edit Setup.
Alternator Edit Setup display
Item Description
Make/Break MAKE – (Make before Break) Next output in the sequence is activated
before deactivating an output.
BREAK – (Break before Make) The output is removed before advancing
the sequence and activating the next output.
MAKE/BREAK is READ ONLY.
Max Out Maximum number of outputs used.