Honeywell 900 - Components

Components
Revision 9 900 Control Station User Guide 3
May 2014
Components
PC 900 Control Station HC900 Controller
• Honeywell’s HC Designer
application configures your
HC900 Controller’s process
• Honeywell’s Station Designer
application configures how your
Control Station interfaces with
the HC900 Controller. Build
custom displays using pre-
configured objects (called
“widgets”) for interfacing with
principal function blocks such as
loops and SPPs. Configure data
logs for storage and trend
viewing.
• Lets you monitor and adjust the
HC900’s process through
custom-built displays and pre-
configured “widgets”
• Load/store/run recipes, profiles,
data logs
• Monitor alarms, diagnostics,
events
• Store data logs
• Integrate loops of control with
digital I/O
• Setpoint programming
• Setpoint scheduling
• Sequencing
• Recipe management
• Alarm processing
• PID control, Advanced control,
autotuning, fuzzy logic