Honeywell 900 - Loops; Overview; Loop Widgets; Loops (A;M Bias, Carbon, On;Off, PID, 3 Position Step Control)

Revision 9 900 Control Station User Guide 147
May 2014
Loops
Overview
Loop widgets
.
Each loop type has its own widget, shown above. From left to right the widgets are:
• Auto/Manual Bias
• Carbon
• On/Off
• PID
• TPSC (Three Position Step Control)
Each widget displays the PV (aqua), SP or Bias (yellow), and Output (green). Use the A/M button to switch
between Auto and Manual. Use the SP Select button to change between LSP (local set point) and RSP
(remote set point).You can change the SP, Bias and Output values/states when LSP and Manual modes are
selected.
Touch the blue title bar at the top of the widget to jump to the Loop Setup display for more details.