Honeywell 900 - Motor Setup

I/O Calibration
Motor Setup
172 900 Control Station User Guide Revision 9
May 2014
Motor Setup
The Motor Setup display lets you set the motor’s Deadband, Travel Time, Low Output Limit, and High
Output Limit.
Item Description
Select PPO Block Select a motor.
Dead Band Deadband is an adjustable gap between forward and reverse motor operation (the range
over which the output can change before a relay is energized).
Travel Time Travel time is the time it takes the motor to travel from its calibrated 0% position to its
calibrated 100% position.
Output Low Limit Low limit for the motor position.
Output High Limit High limit for the motor position.