Main Menu
Alarms and Events Alarm Access
64 900 Control Station User Guide Revision 9
May 2014
Alarms and Events
Alarm Access
Use the Alarms icon to access all the alarms present in Control Station.
Alarm Definition
• 900 Control Station shows both the HC900 Controller alarms and Station alarms on the same alarm
console.
• Station alarms can be configured for a .cde file tag present in the .sds configuration. An alarm can be
defined in the desired tag properties.
• In Controller configuration, a desired tagged point present in the controller can be designated as an alarm
point.
Alarm Indicator
• When there are no alarms present, alarm icon and text on status indicator are grayed out.
• When an alarm is active, the text is displayed in white color and the background turns red.
• Status indicator flashes when an alarm is active and not acknowledged. Acknowledge the alarm to stop
the flashing.
• If the alarm condition goes away (clears) before the operator acknowledges the alarm, the indicator will
turn yellow and continue to flash until acknowledged.
Display Details
• Alarm Console - 900 Control Station shows both the HC900 Controller alarms and Station alarms on the
same alarm console.
• Alarms programmed to automatically acknowledge when the alarm clears may also be manually
acknowledged while the alarm is active, halting the flashing indications on the alarm displays.
To Next Page
Loading...
