Sequencers
Sequencer Operate
142 900 Control Station User Guide Revision 9
May 2014
Sequencer Operate
This widget may be accessed from a Home display button. It shows the details of the sequence currently
running in the Sequencer. You can also load a different sequence from memory into the Sequencer, edit the
current sequence, and save the edited sequence to any slot (sequence number) in memory.
Item Description
Title Name of the selected Sequencer block.
Sequence Information
Sequence Number Memory location of the sequence that is being run by the Sequencer.
Sequence Name Name of the selected sequence.
Sequence Description Description of the sequence.
Total Elapsed Time Total time the sequence has been in Run and Hold states.
State Description of the current step’s state.
Mode
READY: Sequence is at the beginning of step and is ready to run.
HOLD: Sequence is paused at the setpoint value shown.
RUN: Sequence is executing normally.
STOP: Sequence has reached the end of the last step.
To Next Page
Loading...
