Setpoint Scheduler
Setpoint Scheduler Operate
134 900 Control Station User Guide Revision 9
May 2014
Setpoint Scheduler Operate
This widget may be accessed from a Home display button. It shows the details of the schedule currently
running in the Setpoint Scheduler. You can also load a different schedule from memory into the Setpoint
Scheduler, edit the current schedule, and save the edited schedule to any slot (schedule number) in memory.
Item Description
Title Name of the selected scheduler block.
Schedule Information
Schedule number Memory location of the schedule that is being run by the Setpoint
Scheduler.
Schedule name Name of the selected schedule.
Schedule Description Description of the schedule.
Total Elapsed Time Total time the schedule has been in Run, Hold and Ghold states.
State
READY: Schedule is at the beginning of segment and is ready to run. All
events are OFF.
HOLD: Schedule is paused at the setpoint value shown.
RUN: Schedule is executing normally.
GHOLD: Schedule is paused because of excessive deviation.
STOP: Schedule has reached the end of the last segment.
DISABLE: Schedule is prevented from starting until the Scheduler disable
control is ON.
Segment Information
Segment number Current segment
To Next Page
Loading...
