Main Menu
Upload Controller Configuration Uploading Database Image
Revision 9 900 Control Station User Guide 79
May 2014
Uploading Database Image
Lets you upload an image.sdi file from Control Station to an external device (compact flash or USB
memory device).
1. On the Memory Device Utilities menu, press Upload Database Image. Use this option to export an
image file to a memory device.
2. The Select Location for uploading database image dialog box is displayed. Select a location.
Depending on your device selection, image.sdi file is created on either compact flash or USB
memory device. On successful file upload, Successfully Uploaded Database Image message is
displayed. In case the upload fails, Error in uploading database image message is displayed.
3. When the Control Station is powered on, the image.sdi file is automatically detected from the compact
flash and starts uploading the file to the Control Station. Loading From CF message appears on the
screen.
To upload an image .sdi file from a memory stick appropriate settings must be enabled via Station
Designer, the PC configuration tool. (see manual 51-52-25-149).
To Next Page
Loading...
