Main Menu
Summary Displays About Summary Displays
20 900 Control Station User Guide Revision 9
May 2014
Summary Displays
About Summary Displays
There are six summary displays to show the I/O blocks present in the Controller and the variables in the
configuration. The six summary displays are:
• Analog Input Summary
• Analog Output Summary
• Analog Variable Summary
• Digital Input Summary
• Digital Output Summary
• Digital Variable Summary
The Analog Input and Output Summary Displays show the following fields.
1. Physical Address of the Block (RMC)
• Rack Number
• Module Number
• Channel Number
2. Tag
3. Description
4. Value
5. Units
6. Error Status
The following additional fields are displayed when an I/O Safety Function block Analog Input Voting is
configured.
7. Channels A,B, and C
8. VFAIL
9. SFAIL
The following additional fields are displayed when an I/O Safety Function Block Analog Output Validated
is configured.
7. VFAIL
8. FBFAIL
The Analog Variable Summary Display shows the following fields:
1. Variable Number
2. Tag
3. Description
To Next Page
Loading...
