Honeywell 900 - Page 33

Main Menu
About Summary Displays Summary Displays
Revision 9 900 Control Station User Guide 21
May 2014
4. Value
5. Units
The Digital Input Summary Display shows the following fields:
1. Physical Address of the DI Block (RMC)
• Rack Number
• Module Number
• Channel Number
2. Tag
3. Description
4. State
5. Error Status
The following additional fields are displayed when an I/O Safety Function block Digital Input Voting is
configured.
6. Channels A,B, and C
7. VFAIL
8. SFAIL
The following additional fields are displayed when an I/O Safety Function Block Digital Output Validated
is configured.
6. VFAIL
7. FBFAIL
The Digital Output Summary Display shows the same information as above plus the Type of the module.
The Digital Variable Summary Display shows following fields:
1. Variable Number
2. Tag
3. Description
4. Data