Process Displays
Calendar Event View Special Days Event Setup
112 900 Control Station User Guide Revision 9
May 2014
View Special Days Event Setup
The Calendar Event Block can be configured to override its normal Event processing when any of the 16
Special Days occurs. This override will remain in effect for the 24-hour period associated with the Special
Day. This feature can be used to force selected Event outputs to remain off on designated holidays, for
example.
This display allows you to see how the eight Event outputs will behave when a Special Day occurs.
Item Description
Event Name Name of Events 1 through 8
Setpoint Handling This title is displayed when the Special Day Mode is configured as “Use
Alternate Event Times”
Alternate Setpoint Displays the Alternate Setpoint Times (Hours:Minutes). This information will
only appear if the Special Day Mode is configured as “Use Alternate Event
Times”.
Special Day Mode Event output behavior
Disable Output The Event output is disabled on Special Days (for the entire 24 hour period).
Use Alternate Setpoint On Special Days, the Event output will trigger at the Alternate Setpoint Time
shown on this display.
Normal The behavior of the Event output is not overridden on Special Days. The
Event output will trigger the way it normally triggers, based on the
configuration of the currently active Setpoint Group.
To Next Page
Loading...
