Honeywell 900 - Delete Data Logs

Main Menu
Data Logging Delete Data Logs
74 900 Control Station User Guide Revision 9
May 2014
View Batch Groups Detail Display
The operator can touch the View Batch Status button on the Data Logging menu to display the Batch
Status display. This display shows detailed information for all of the batch groups. For each batch group,
it indicates whether a batch is running or not, when the batch starts, when the batch stops, and the duration
for each running and stopped batch. By touching one of the small blue batch group buttons on the left-hand
side of the display, you can view the batch header details for any batch group. Touch the Close button to
close the batch header details box:
Delete Data Logs
Lets you view one or all data log files on CompactFlash. Use the + and – buttons to navigate through the
folder and files.