Setpoint Programmers
Overview
Revision 9 900 Control Station User Guide 121
May 2014
Item Description
Segment Current segment
Type Type of current segment: ramp or soak
Elapsed Time elapsed in the segment
Remain Time remaining in the indicated segment
Advance Push button to cause the program to jump to the next segment.
When the program is already in the last segment, the advance request is
ignored.
Programs cannot be advanced to the first segment. Current state must
either READY or HOLD.
PV Value of Process Variable.
SP Value of setpoint.
Units Engineering units of the setpoint.
Run Touch to start a program that is in HOLD or READY state.
Hold Touch to put program in HOLD.
Reset Touch to reset a HOLD or STOP program to the first segment. Any edits
made to the program are lost unless they were SAVED. See SAVE on the
display.
To Next Page
Loading...
