Honeywell ATC928G3000 User Manual

8
Wireless connectivity Guide
To bind a Radiator Controller (HR92) to a Wi-Fi evohome
Controller (ATC928G3000) “radiator valve” zone...
On the evohome Controller
1
Press and hold SETTINGS for 5 seconds
2
Press the green tick
3
Press ZONE CONFIGURATION
4
Press on the required zone
5
Press RF DEVICE BINDING
6
Press the forward arrow
On the Radiator Controller
7
Press the button once − it
should display UNBOUND
8
Press and hold the button for a further
5 seconds until it displays BIND
9
Press the button once – it
should display BINDING
On the evohome Controller
10
Press the bind button
You should receive a SUCCESS message on
both the evohome Controller and the Radiator
Controller. If not go back and re-bind.
Radiator Controller
(HR92)
Wi-Fi evohome Controller
(ATC928G3000)

Honeywell ATC928G3000 Specifications

General

Brand	Honeywell
Model	ATC928G3000
Category	Controller
Language	English