98 Voyager XP User Guide
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode using the
Programming Chart.
To remove this delay, scan the Intermessage Delay barcode, then set the number
of delays to 0. Scan the Save barcode using the Programming Chart.
2nd Scan Transmission1st Scan Transmission
Intermessage Delay
Intermessage Delay