Voyager XP User Guide 15
USB HID
Scan the following code to program the scanner for USB HID barcode scanners.
USB Serial
Scan the following code to program the scanner to emulate a regular RS232-based
COM Port. If you are using a Microsoft® Windows® PC, you will need to download a
driver from the Honeywell website (www.honeywellaidc.com). The driver will use the
next available COM Port number. Apple® Macintosh computers recognize the
scanner as a USB CDC class device and automatically uses a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Barcode Scanner
USB Serial
CTS/RTS Emulation On
* CTS/RTS Emulation Off
To Next Page
Loading...
Need help?
General