CHAPTER
11
Voyager XP User Guide 207
MAINTENANCE AND
TROUBLESHOOTING
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see Customer Support on
page xv).
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following sections describe
periodic checks to ensure dependable operation.
Clean the Scanner
The scanner or base’s housing may be cleaned with a soft cloth dampened with
water or a mild detergent-water solution. If a mild detergent solution is used, wipe
the scanner or base with a clean cloth dampened only with water to remove any
detergent residue.
Caution: Do not submerge the scanner in water. Do not use abrasive
wipes or cloths on the scanner’s window. Abrasive wipes may
scratch the window. Never use solvents (e.g., acetone) on the
housing or window. Solvents may damage the finish or the
window.
Caution: Ensure all components are dry prior to mating the scanner with
charging accessories or other peripheral devices. Mating wet
components may cause damage not covered by the warranty.
To Next Page
Loading...
Need help?
General