46 Voyager XP User Guide
When External Power Only is selected, the scanner battery only charges from the
base’s external power supply. If there is no external power supply, the scanner bat-
tery does not charge.
Note: If you are using a cordless charge base in Presentation Mode, External Power Only is
the only setting available.
Default = External or Interface Cable Power.
Page
Page Mode
By default, the paging button on the base or Access Point pages the scanners
associated with that base or Access Point. If you want the paging button on your
base or Access Point to be disabled, scan the Page Mode Off barcode, below. When
Page Mode is off, the base or Access Point will no longer page scanners when the
button is pressed. The red LED on the base or blue LED on the Access Point will
remain lit to indicate that Page Mode is off. (This light will go out when the button
is pressed, then back on when it’s released.) Default = Page Mode On.
Base Charge Off
External or Interface Cable
Power
External Power Only
* Page Mode On
Page Mode Off
To Next Page
Loading...
Need help?
General