Honeywell ESSER Fire Alarm Control Panel Compact - Trigger Programming Workflow; Programming Trigger Events and Panel States

Fire Alarm Control Panel Compact
28 FB 798238.GB0 / 10.14
5.6.3 Trigger programming
2ABC
5
JKL
3DEF
CLR
4GHI
1
2ABC
5JKL
2ABC
3
1 zones
2 control zones
- detector/transponder
4 configuration
5 settings
6 verify and save
configuration
3
3
1 overview (all)
2 overview (ATU)
3 overview (sounder)
4 overview (FPE/FIE)
5 select single assignment
- multiple assignment
control zones
3
3 3
control zone
control zone : +0001+
control 1
3
1 function type : common
2 hardware
3 inverted : off
4 trigger events : 0
5 pulse duration (s) : off
6 pulse latched : off
7 trigger prevention : 0
*control zone >0006<
3
3
trigger events
1 event 1 : fire
2 event 2 : none
3 event 3 : none
4 event 4 : none
5 event 5 : none
6 event 6 : none
7 event 7 : none
3
*event 1
1 type : panel state
2 state : fire
3
3
type
1 fire
2 techn. alarm
3 pre-alarm
4 fault
5 control input
6 system input
7 unused
3
*event 1
1 type : panel state
2 state : pre-alarm
3
Fig. 40: >Programming outputs< menu screen
Control zones
Single assignment
Select control zone
Trigger events
Event 2 next page
Select type
Panel state
Pre-alarm
 save and exit sub-menu