A terminal server in a redundant server system
Modems
You can use modems to connect controllers located at remote sites, such as reservoirs.
If you only require infrequent scanning—as in the case of a reservoir—you could use a dial-
up modem. If you require more frequent scanning, you could use a modem in conjunction
with a leased line.
Note that you can also use modems to connect remote Flex Stations—for example to give
engineers after-hours access from home.
Specialized links
If modem connections are not suitable, you can also use radio, satellite or other specialized
links. In such cases, discuss your requirements with your local Honeywell representative.
Controllers
Honeywell 2017 56
To Next Page
Loading...
Need help?
General
