Honeywell Gamewell-FCI GWF-7075 - Page 46

46 GWF-7075 Addressable Fire Alarm Control Panel Manual — P/N LS10147-002GF-E:E 06/11/2019
Programming Overview Programming Menu Quick Reference
Point
(cont.)
Internal Power and
External Power
Point # Section 7.5.1
CO SUPR/FIRE SUPR
No Accessory
SDR BAS
RLY BAS
I-SdrBA (Intelligent
Sounder Base)
W-Detector
1,2,4
Photo
Acclimate
1,2,3,5
Heat
W-SUP DET
1,2,4
Same as W-Detector
UNUSED
Section 7.5.2
B NOTIF
NOTIF OUTPUT
Select Group,
Supervised
Yes or No
Edit Name
CONTROL
CIRCUIT
A NOTIF
NOTIF OUTPUT
Select Group
Super-vised
Yes or No
Edit Name
Section 7.5.2
CONTROL
CIRCUIT
AUX PWR
CONSTANT
Edit Name
AUX RESET
AUX DOOR
AUX SYNC
B SWITCH*
MANUAL PULL
Latch and Non-Latch
feature only appear for
WATERFLOW,FIRE
SUPERVISORY, FIRE
TAMPER, ZONE AUX1,
ZONE AUX2, SYSTEM
AUX1, SYSTEM AUX2
Section 7.5.2
Point
(cont.)
Internal Power and
External Power
Point #
WATERFLOW
FIRE
SUPER-VISORY
FIRE TAMPER
FIRE DRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX 1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL
RELEASE
INTER-LOCK
STATUS POINT
A SWITCH* Same as B SWITCH
B DETECT*
2-WIRE SMOKE
Zone #
Edit Name
4-WIRE SMOKE
CO 4 WIRE DET
CO 4 WIRE SUP
DET
Latch
Non-Latch
A DETECT*
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
CO 4 WIRE SUP
DET
Latch
Non-Latch
5880 Enter Point # UNUSED
Section ,
“Phone Lines”
NOTIF NOTIF OUTPUT Select Group Edit Name
CONTROL CIRCUIT
System
Options
Communication
Options
Auto Time Test Set the Hour
*02:00AM
Section , “Auto Test
Time”
Set the Minutes
Select AM/PM
Enter Interval
24 hrs,12 hrs, *6 hrs, 4 hrs
Menu Options/Defaults Comments
Table 6.5 Programming Menu Options (Continued)