4
Honeywell 30 Series IP Cameras User Guide
2 ACCESSING THE CAMERA
This chapter contains the following sections:
• Installing the Unified Tool, page 4
• Discovering Your Camera in the Network page 6
• Assigning a New IP Address to Your Camera, page 7
• Upgrading the Camera’s Firmware, page 8
• Accessing the Camera from a Web Browser, page 9
Installing the Unified Tool
To get the installation package of Unified Tool:
• Go to https://mywebtech.honeywell.com
and login. Go to Download Center
Video
IP Cameras Camera Discovery Tools & Utilities Honeywell Unified
Tool. Download and unzip the installation package of Unified Tool to your computer.
• Copy the installation package of Unified Tool from the CD along with the package of
the camera to your computer.
To install the Unified Tool:
1. Double-click the installation program in the installation package.