32
Honeywell 30 Series IP Cameras User Guide
ranging from Medium to Excellent. If you select Customized, you can enter a value
to specify the quality.
• Maximum bit rate: Select a bit rate from the drop-down list. The bit rate ranges from
1 Mbps to a maximum of 40Mbps. If you select Customized, you can enter a value to
specify the maximum bit rate.
The Maximum bit rate setting in the Fixed quality configuration can ensure a reasonable
and limited use of network bandwidth. For example, in low light conditions where a Fixed
quality setting is applied, video packet sizes can tremendously increase when noises are
produced with electrical gains.
Configuring Audio Settings
Go to Setup Camera Setup Audio.
Note: HC30WF5R1/HC30W25R3-12V/HC30W25R3 supports this function.
Figure 37 Audio Settings (HC30W25R3)
Figure 38 Audio Settings (HC30WF5R1/HC30W25R3-12V)
Mute: Check to disable audio transmission from the network cameras to all clients.
Microphone source: Select Internal or External from the drop-down list.
Internal microphone input gain: Select the gain of the internal audio input according to
ambient conditions. Adjust the gain from 0% (least) to 100% (most).
External microphone input gain (HC30W25R3): Select the gain of the external audio
input according to ambient conditions. Adjust the gain from 0% (least) to 100% (most).
Audio type: Select audio codec as G.711 or G.726 and the bit rate.
To Next Page
Loading...
